HeadroomDESK

Liquidation price calculator for Binance, Bybit and Delta

A Bybit, Binance and Delta Exchange India liquidation calculator for BTC perpetuals: where the position is liquidated under each venue's own formula, with your stop checked against it.

1 · Your position

Venue
Margin mode
Position side
USD
BTC

In BTC, for example 0.5

×
USD
USD
Override the maintenance rate
%
USD

Liquidation price

–

Room to liquidation
–
Distance in price
–
Maintenance rate used
–

3 · How the venue calculates it

Runs in your browser. Nothing you type leaves this page.

A leveraged position is liquidated when its margin, after the open loss, falls to the venue's maintenance margin. This calculator finds that price for a BTC perpetual on Binance USDⓈ-M, Bybit or Delta Exchange India, with each venue's own formula, and shows how much room your stop leaves.

Arithmetic on your inputs, not advice. A leveraged position can lose all the margin behind it; in cross margin, the whole balance.

What the number means, with a worked example

How to read this number: what it means, the formula in plain words, a worked example, the common mistake and the venue's rule. The full venue formulas and more examples follow.

How to read the result

The liquidation price, in five parts

What the number means

The mark price at which the venue closes this position. At that price, the margin left after the open loss has fallen to the venue's maintenance margin: a small buffer the venue keeps so it can close the position before the account goes below zero. The bankruptcy price, where the whole margin is gone, sits just beyond it.

The formula, in plain words

Take the margin you posted: the position's value divided by the leverage. The position can lose that margin, less the maintenance margin the venue holds back. The price at which the open loss reaches that amount is the liquidation price. With no margin added and no fixed maintenance amount, Binance's formula reduces to:

Long: LP = open · (1 − 1/L) / (1 − MMR) Short: LP = open · (1 + 1/L) / (1 + MMR)

L is the leverage; MMR is the maintenance margin rate for the position's bracket or tier.

One worked example

The calculator's starting inputs: a Binance long of 0.5 BTC opened at 60,000, isolated, 10× leverage. The position's value, 30,000 USD, falls in Binance's bracket 1 (up to 300,000 USD), maintenance rate 0.40%.

  1. Margin posted30,000 ÷ 10 = 3,000 USD
  2. The two factors1 − 1/10 = 0.9; 1 − 0.40% = 0.996
  3. Liquidation price60,000 × 0.9 ÷ 0.996 = 54,216.9

Panel 2 shows 54,216.9: 5,783.1 below the open price, a 9.64% move. The first row of the worked examples below is the same position.

The common mistake

Reading 10× as "liquidated after a 10% move". The maintenance margin is held back, so at 10× the room is 9.64%, and at 50× it is 1.61%, not 2%. A stop placed beyond the liquidation price never fills: the venue closes the position first.

Source and venue rule

  • Binance USDⓈ-M: the liquidation formula from Binance's support centre; brackets from its Leverage & Margin page, read 2026-11-15.
  • Bybit: its Help Center page "Liquidation Price Calculation under Isolated Mode (Unified Trading Account)"; risk-limit tiers read 2026-11-15.
  • Delta Exchange India: the maintenance rate you type from Delta's position screen; contract value 0.001 BTC from Delta's contract specification.

All three liquidate on the mark price, not the last trade. If the venue's order screen shows a different number, the venue's number counts. Sources and read dates: formula reference.

How each venue calculates it

The three venues use different formulas, so the same position gives three different prices. The calculator never blends them.

Binance USDⓈ-M (one-way mode)

Binance publishes this formula in its support centre. The maintenance rate and amount come from the bracket that covers the position's value at the liquidation price.

LP = (WB − TMM₁ + UPNL₁ + cum − s·Q·EP) / (Q·MMR − s·Q)
LP
liquidation price
WB
wallet balance: in isolated mode, the position's margin (Q·EP / leverage) plus any margin added; in cross mode, the cross wallet balance
TMM₁, UPNL₁
maintenance margin and open P/L of your other positions (cross mode only; zero in isolated mode)
cum
the bracket's maintenance amount
s
+1 for a long, −1 for a short
Q
size in BTC
EP
open price
MMR
the bracket's maintenance margin rate

Fees are not a term: they have already left the wallet balance. Hedge mode is not covered.

Bybit USDT perpetual (isolated, Unified Trading Account)

Bybit's published formula. Maintenance margin is taken on the position value at the liquidation price, so the rate sits in the divisor, as with Binance. Bybit reserves an estimated fee to close inside both the initial and the maintenance margin, so it cancels and does not move the liquidation price.

Long: LP = [EP·Q − EP·Q/leverage − extra/(1 − taker) − deduction] / [Q − Q·MMR] Short: LP = [EP·Q + EP·Q/leverage + extra/(1 + taker) + deduction] / [Q + Q·MMR]
MMR
the risk-limit tier's maintenance margin rate, for the tier that covers the position value at the liquidation price
deduction
that tier's maintenance margin deduction
extra
margin added to the position
taker
the taker fee rate in the parameter table

The calculator reproduces the worked example in Bybit's help centre: a 1 BTC long at 40,000 with 50× leverage and 3,000 USDT added (MMR 0.5%, taker 0.055%) is liquidated at 36,380.25.

Delta Exchange India (USD-settled, isolated)

Delta liquidates when the position's margin minus its open loss equals the maintenance margin. Both are a share of the value at the open price.

N = contracts · contract_value · EP M = IM%·N + extra MM = MM%·N Long: LP = EP − (M − MM) / (contracts · contract_value) Short: LP = EP + (M − MM) / (contracts · contract_value) MM% = MM_min + slope · max(0, N − threshold)

IM% is one divided by the leverage you choose. The bankruptcy price is where the loss equals the whole margin M. The threshold is a position value in USD: below it the maintenance rate stays at its minimum and the full leverage is allowed; above it both rates rise with the position value. Delta charges a liquidation fee when it liquidates; that fee is not part of the price formula.

Worked examples

Each row comes from the same reference code the calculator is tested against. The inputs are illustrative, not market prices, and the maintenance rates are fixed in the table so the rows never go out of date.

Open price 60,000.0 in every row (illustrative). Maintenance rates fixed for the example.
Venue and modeSideSizeLeverageMaintenance rateLiquidation price
Binance, isolatedlong0.5 BTC10×0.40%54,216.9
Binance, isolatedshort0.5 BTC10×0.40%65,737.1
Bybit, isolatedlong0.5 BTC10×0.50%54,271.4
Bybit, isolatedshort0.5 BTC10×0.50%65,671.6
Delta India, isolatedlong500 contracts (0.5 BTC)10×0.50%54,300.0 (bankruptcy 54,000.0)
Delta India, isolatedshort500 contracts (0.5 BTC)10×0.50%65,700.0 (bankruptcy 66,000.0)
Binance, isolatedlong0.5 BTC50×0.40%59,036.1

At 50× the room to liquidation is 1.61% of the open price, so a stop at 58,000.0 sits beyond liquidation: the calculator warns that the stop cannot fill.

What this does not cover

  • Venues liquidate on the mark price, not the last traded price. A wick on the last price can pass your liquidation price without triggering it, and a mark-price move can trigger it without a visible wick.
  • Funding payments change your margin over time and move the liquidation price. They are not included.
  • Binance hedge mode, Bybit cross and portfolio margin, and Delta cross margin are not covered.
  • Tiers and fees change. The parameter table is dated; check the venue's current page before relying on a number.

When not to use this

Do not use it to choose leverage or to decide whether to open a position. It reports where a position you describe is liquidated; it does not say whether that position is a good idea. If your venue's own order screen shows a different liquidation price, the venue's number is the one that counts.

Related

Last reviewed (UTC).